Gather all of your supplies

remove top cap

Loosely assemble-

Small headed screws & washer on top.

lock washer & nut on bottom

remove bottom cap

Slide large headed screws into the slots

Replace bottom cap

(We leave ours off, it's up to you)

Slide clip assembly into top slots

& align holes over bottom screws

Tighten the top 2 screws

Stop the  screw head from turning with your finger

or a screwdriver.

Tighten firmly

Replace the top cap

Place lock washers & nuts on bottom screws

Tighten firmly

Fully assembled pump

The bracket allows the pump to be raised or lowered

& tilted down on day 1.

We always use 2 pumps for the first 24 hours

& 1 pump after that