Each of these ice carving bits will fit in your stock die
grinder.
You will
notice that 95% of the bits we sell are either Stainless steel, Black coated to
prevent rust, or painted. These bits will last you a long time. Much
longer than plain Steel which will rust.
Super Vee! $69.95
Item# Vee
Bit Super
An improved version of The Vee (Alford) Bit has been used to detail ice for
over 20 years!
Vee Bit $37.95
Item# Vee Bit
The Vee (Alford) Bit has been
used to detail ice for 20 years!
3/8" $ 40.95
Item# EM 3/8 1/4Shank
Video to the right -------
1/4" $ 37.95
Item# EM 1/4 1/4Shank
Video to the right -------
1/8" $ 37.95
Item# EM 1/8 1/4Shank
Video to the right -------
"Roscoe bit" $ 57.95
Item# Roscoe 1/4Shank
I have had a roscoe bit in my tool
arsenal since 1997 (1/4" shank)
A very sharp tool to create fine
detail. It also makes Fancy lettering.
Video to the right -------
Tracing Bit (Vosburg bit)- $64.95
(7 degree taper)
Item# Tracing 1/4Shank
Video to the right -------
1/4" Pencil Burr $22.95/ea.
Item#
1/4" Pencil Burr Orange
Item#
1/4" Pencil Burr Green
Video to the right -------
1/4" Flame Burr $22.95/ea.
Item#
1/4" Flame burr Orange
Item#
1/4" Flame burr Green
Video to the right -------
1/4" Cylinder Burr $22.95/ea.
Item#
1/4" Cylinder burr Orange
Item#
1/4" Cylinder burr Green
Video to the right -------
1/4" Taper Burr $22.95/ea.
Item#
1/4" Taper burr Orange
Item#
1/4" Taper burr Green
Video to the right -------
1/4" Bull Nose Burr $22.95/ea.
Item#
1/4" Bull Nose burr Orange
Item#
1/4" Bull Nose burr Green
Video to the right -------
Butauski Kit- $189.95
Item#
Butauski Kit
Videos of these bits shown within this "Grey Block"
Orange sleeve $22.95/ea.
Item#
Bit orange sleeve 1/4"
1/4" Shank 3.5" overall length, 3/4" diameter
Finishing
Bit- $22.95
Item# Finishing bit
1/4"
budget bit- $9.95
Item# EM 1/4 1/4Shank Budget
Budget Roscoe $ 24.95
Item# Budget Roscoe
Same length as a Roscoe bit. Hasn't been ground down.
