3/8" Versatile Kit- $749.95    Item# Kit Versatile 3/8" 

Includes- Medium Die grinder, Medium shaft (installed)

Bits with 3/8" shanks- 1/8" End mill, 1/4" End mill, Face Burr wide, Bubble bit, 1/2" End mill (6" long), 3/8" Cylinder bit, Cone end mill.

Videos of these bits shown within this "Grey Block"

Same bit with a 3/8" shank

Cutting Kit 3/8" - $167.95 (cheaper than 1/4" shanks)

 Item# EM Cut Kit 3/8    

(Includes 3/8" bit, 1/4" bit, 1/8" bit, 3/8" End mill holder & Small Shaft Adapter)

See the videos in this block.  (Same bit except these have 3/8" shanks)

Bubble bit Quarter $135

3/8" Shank

Item#- Bubble Bit Quarter 

Bubble bit Nickel $135

3/8" Shank

Item#- Bubble Bit Nickel 

Cone end mill 5 degree taper (5.5 " overall length) $78.95

Item# Bit EM cone    

Ideal for large detail & carving 3-D roses inside the ice.

Cylinder 3/8" 125 Grit (5" overall length) $74.95  

Item# Bit Cylinder 3/8"    

1/2" End Mill 3/8" Shank (6" overall length) $60.95

Item#- EM 1/2 3/8Shank 6oal 

Same bit with a 3/8" shank

3/8" bit- $26.95  Item# EM 3/8 3/8Shank 

4 1/4" oal, 3" of cut

1/4" bit- $22.95  Item# EM 1/4 3/8Shank 

3 1/2" oal, 2 1/4" of cut

1/8" bit- $28.95  Item# EM 1/8 3/8 Shank

2 3/4" oal,  1" of cut

1/8" XL bit $28.95  Item# EM 1/8XL 3/8 Shank

3.25" oal,  1.5" of cut

1/4" XL With 3/8" Shank $51.95  Item# EM 1/4XL 3/8 Shank     

5.1/2"oal, 3.5" of cut

Face Burr Wide- $39.95

Item#- Face Burr Wide 

Face Burr Narrow- $39.95

Item#- Face Burr Narrow  

3/16" bit $31.95 Item# EM 3/16 3/8 Shank 

3 3/4" oal, 2" of cut, 3 flute

1/8" Super Long bit $31.95  Item# EM 1/8SL 3/8 Shank

Super Strong Super Long

3.75" oal,  2" of cut

3/8" End Mill Holder- $52.95

Item# EMH 3/8    

1/16" bit    $27.95  Item# EM 1/16  3/8 Shank

3.25" oal,  1.5" of cut 

Small Shaft Adapter- $36.95 

Item# Shaft Adapt SM    

Large shaft Adapter for ice carving, fits large Makita 800- $52.95

 Item# Shaft Adapt LG    

"Medium Shaft" for the Medium Makita GD0601 & GD0600 for ice carving   $122.95

 Item# Shaft MD     

"Large Shaft" for the Large Makita 800 for ice carving   $169.95

 Item# Shaft LG