1/4″ Detail Bits

  • IMG_7047

    Basic Kit

    Basic Kit for beginners

    Includes –
    Bottle Diegrinder
    Vee Bit Budget
    3/8″ Endmill, 1/4″ Shank
    1/2″ cylinder bit

    $189.98
    Quantity -

  • IMG_7026

    Budget Vee 1/4″ Shank

    $29.98
    Quantity -
  • IMG_4923

    Pebble burr 1″ with 1/4″ shank

    $19.98
    Quantity -
  • bubble-bit-dime-quarter

    Bubble Bit Dime 1/4″ shank

    $153.98
    Quantity -
  • bubble-bit-quarter-quarter

    Bubble Bit Quarter 1/4″ shank

    $153.98
    Quantity -
  • bubble-bit-silver-dollar-quarter

    Bubble Bit Silver Dollar 1/4″ shank

    $153.98
    Quantity -
  • Bubble Bit Kit includes all 3 of the above Bubble Bits 1/4″ Shank

    quarter-inch-buble-kit

    Bubble Bit Kit 1/4″

    $429.98
    Quantity -
  • An improved version of The Vee (Alford) Bit has been used to detail ice for over 20 years!
    Use in a stock medium die grinder

    super-vee-for-ice-sculpting-gold

    Vee Bit Super

    $78.98
    Quantity -
  • I have had a roscoe bit in my tool arsenal since 1997 (1/4″ shank)
    A very sharp tool to create fine detail. It also makes Fancy lettering.

    roscoe-bit-for-ice-carving-and-sculpting-v-bit

    Roscoe bit

    $72.98
    Quantity -
  • Use in a stock medium die grinder
    7 degree taper

    tracing-bit-silver

    Tracing Bit (Vosburg bit)

    $82.98
    Quantity -
  • Use in a stock medium die grinder

    pebble bit kit for ice carving

    Pebble Bits- 3/4″, 1″, & 1.5″

    $185.98
    Quantity -
  • Use in a stock medium die grinder

    pebble-1-inch

    Pebble Bit 1″

    $16.98
    Quantity -
  • Use in a stock medium die grinder

    pebble-bit-three-quarters

    Pebble Bit 3/4″

    $15.98
    Quantity -
  • Use in a stock medium die grinder

    pebble-bit-for-ice-carving-and-sculpting-v-bit

    Pebble Bit 1.5

    $153.98
    Quantity -
  • Use in a stock medium die grinder

    spike-bit-for-ice-carving-silver

    Spike Bit

    $153.98
    Quantity -
  • Use in a stock medium die grinder

    eighth-sl-x-quarter

    1/8″ Superlong End Mill, 1/4″ Shank

    $43.98
    Quantity -
  • Use in a stock medium die grinder
    3.25″ oal, 1.5″ of cut

    sixteenth-x-quarter

    1/16″ End Mill, 1/4″ Shank

    $39.98
    Quantity -
  • Convert a 1/4″ shank to 3/8″ shank

    sleeve-for-ice-carving

    3/8″ Sleeve

    $9.98
    Quantity -
  • Turn your Metric Makita into a 1/4″ die grinder-
    GD0600, 906, GD0601, GEO600, 906H

    dsc_0123

    Collett 1/4″

    $9.98
    Quantity -