CNC Bits

  • 12″ total length. 9″ of cut. 3/4″ Shank
    Cut all of the way through a block!
    7,000 RPM (40″/minute)

    12-inch-punch-out-bit-ice-cnc

    Cut Out 12″

    $329.98
    Quantity -
  • 4″ total length. 2″ of teeth. 1/2″ Shank
    Improve your CNC's production
    Notched shank to help prevent slipping in the collett
    16,000 RPM 10″/second (600″/minute)

    4-oal-carbide

    Blizzard Bit 4″ 1/2″ Shank

    $109.98
    Quantity -
  • 6″ total length. 4″ of teeth. 1/2″ Shank
    Improve your CNC's production
    Notched shank to help prevent slipping in the collett
    Recommended 16,000 RPM 6″/second (360″/minute)

    blizzard-bit-ice-carving-6-inch-cnc

    Blizzard Bit 6″ 1/2″ Shank

    $199.98
    Quantity -
  • 7″ total length. 5″ of teeth. 1/2″ Shank
    Improve your CNC's production
    Notched shank to help prevent slipping in the collett
    Recommended 16,000 RPM 6″/second (360″/minute)

    blizzard-bit-ice-carving-7-inch

    Blizzard Bit 7″ 1/2″ Shank

    $229.98
    Quantity -
  • For use in an ice lathe
    Recommended RPM- 14,000
    Recommended feed rate for Spindle- 3″/Second (180″/minute)
    Recommended feed rate for Router- 2″/Second (120″/minute)

    6-oal-carbide

    1/2″ End Mill 1/2″ Shank 6″ OAL

    $52.98
    Quantity -
  • 1/2″ Shank x 1/2″ Width x 6″ Over All Length 3 Flute Endmill with 4″ of cut
    Recommended RPM- 14,000
    Recommended feed rate for Spindle- 3″/Second (180″/minute)
    Recommended feed rate for Router- 2″/Second (120″/minute)

    IMG_4480

    EM 1/2 x 1/2 x 6 OAL

    $69.98
    Quantity -
  • For use in an ice lathe
    Recommended RPM- 14,000
    Recommended feed rate for Spindle- 3″/Second (180″/minute)
    Recommended feed rate for Router- 2″/Second (120″/minute)

    IMG_4781

    1/2″ End Mill 1/2″ Shank 6″ OAL Ball Nose

    $79.98
    Quantity -
  • 3 Flutes, 8″oal, 5″ of cut
    Recommended RPM- 14,000
    Recommended feed rate for Spindle- 3″/Second (180″/minute)

    8-inch-3-flute

    1/2″ End Mill 1/2″ Shank 8″ OAL

    $99.98
    Quantity -
  • 3 Flutes, 7″oal, 5″ of cut
    Recommended RPM- 14,000
    Recommended feed rate for Spindle- 3″/Second (180″/minute)
    Recommended feed rate for Router- 2″/Second (120″/minute)

    7-inch-three-flute-half-inch-shank-for-ice-carving

    1/2″ End Mill 1/2″ Shank 7″ OAL

    $98.98
    Quantity -
  • Recommended RPM- 24,000
    5″ overall length1/2″ shank 3.5″ length of cut 1/4″ tip
    This bit fits in both the above 1/2″ end mill holder & a CNC collet.

    quarter-inch-xl-half-inch-shank

    1/4″ End Mill XL 1/2″ Shank

    $54.98
    Quantity -
  • 6″ total length. 4 1/2″ of teeth. 1/2″ Shank
    Improve your CNC's production
    Recommended RPM- 14,000
    Recommended feed rate for Spindle- 3″/Second (180″/minute)
    Recommended feed rate for Router- 2″/Second (120″/minute)

    6-oal-carbide

    1/2″ End Mill 1/2″ Shank 6″ OAL Carbide

    $119.98
    Quantity -
  • 1/2″ Shank

    sphere-bit

    Ice Sphere bit 2.5″

    $389.98
    Quantity -
  • The most versatile detail bit Period! Use the pointy tip for small details & plunge it in for deep heavy details. Titanium!
    Bits with 3/8″ shank require a shaft and 3/8″ end mill holder

    vee-bit-costic-gold

    Costic Vee Bit

    $109.98
    Quantity -
  • 4 1/4″ oal, 3″ of cut
    Bits with 3/8″ shank require a shaft and 3/8″ end mill holder

    three-eighths-x-three-eighths-em

    3/8″ End Mill 3/8″ Shank

    $28.98
    Quantity -
  • 3.25″ oal, 1.75” of cut
    Bits with 3/8″ shank require a shaft and 3/8″ end mill holder

    quarter-inch-by-three-eighths-inch-end-mill-ice-carving

    1/4″ End Mill 3/8″ Shank

    $24.98
    Quantity -
  • 2 3/4″ oal, 1″ of cut
    Bits with 3/8″ shank require a shaft and 3/8″ end mill holder

    eighth-inch-x-three-eighths

    1/8″ End Mill 3/8″ Shank

    $29.98
    Quantity -
  • 3.25″ oal, 1.25″ of cut
    Bits with 3/8″ shank require a shaft and 3/8″ end mill holder

    eigth-inch-xl-by-three-eighths-inch-for-ice-carving

    1/8″ End Mill XL 3/8″ Shank

    $29.98
    Quantity -
  • Epoxy 3/8″ bits into this sleeve to convert to 1/2″

    half-inch-sleeve

    1/2″ Sleeve

    $15.98
    Quantity -
  • 3 3/4″ oal, 2″ of cut, 3 flute
    Bits with 3/8″ shank require a shaft and 3/8″ end mill holder

    three-sixteenths-x-three-eighths

    3/16″ End Mill 3/8″ Shank

    $33.98
    Quantity -
  • 3.75″ oal, 2″ of cut
    Bits with 3/8″ shank require a shaft and 3/8″ end mill holder

    eighth-inch-sl-three-eighths

    1/8″ End Mill Super Long 3/8″ Shank

    $33.98
    Quantity -
  • 3.25″ oal, 1.5″ of cut
    Bits with 3/8″ shank require a shaft and 3/8″ end mill holder

    one-sixteenth-inch-bit-for-ice-carving

    1/16″ End Mill 3/8″ Shank

    $29.98
    Quantity -