Standard 2" chisel

We use a Makita #98202 Chisel Sharpener

As you can see we modified the blade holder to accept a Chisel

Adjust the height & angle of the guide

Notice the water reservoir- Fill & turn the black dial slightly to allow a dribble of water out

Be sure the Chisel is at a 90 degree angle to the guide

Place the chisel and bracket on the guide & slowly move back & forth across the spinning stone

Unfortunately practice is necessary to get a good edge

Using a leather Strop

Place the Chisel at the front of the Strop

Press the Chisel down against the strop & drag it to you

Click here to see which ice carving chisels we offer