6″ total length. 4″ of teeth. 1/2″ ShankImprove your CNC's productionNotched shank to help prevent slipping in the collettRecommended 16,000 RPM 6″/second (360″/minute)
Drill press requirements-11″ distance between chuck and mounting plate1.5″ of chuck travel1700 RPM works very wellRecommended if not using CNC to prep blanks(prep ice blanks to 6″ x 20″)
Recommended RPM- 24,0005″ overall length1/2″ shank 3.5″ length of cut 1/4″ tipThis bit fits in both the above 1/2″ end mill holder & a CNC collet.
Fits large Makita die GrindersShaft InstalledTake out 4 screws and swap with this pre-assembled neck