Tracing Bit (Vosburg bit) with 1/4″ Inch Shank
$125.98
Use in a stock medium die grinder
7 degree taper
Additional information
| Weight | .1 lbs |
|---|---|
| Dimensions | 1.25 × .33 × .33 in |
| Shank Size | 1/4" Inch |
| Bit Width | 1/2" |
| Bit Cutter Length | 1 3/4" |
| Flutes | 3 |
| Bit Recommended Cut Depth (Per Pass/Step Down) | 1/2" |
| CNC Recommended Feed Rate | 1/2"/sec |
| CNC Recommended Plunge Rate | 1/2"/sec |
| CNC Recommended RPMs | 10000 rpms |
| Bit Style | Detail, End Mill, Tapered |
Related products
-
Flame Burr Bit Orange with 1/4″ Inch Shank
$33.98Use in a stock medium die grinder
-
Bullet Burr Bit 125 Paddle Style Threaded
$219.98 Read moreMuch lighter than most large burrs
(now with slot to reduce weight even more)
Will work with medium die grinder with medium shaft -
Pencil Burr Bit Green with 1/4″ Inch Shank
$33.98Use in a stock medium die grinder
