1/4″ End Mill Bit 3/8″ Inch Shank
$32.98
3.25″ oal, 1.75” of cut
Bits with 3/8″ shank require a shaft and 3/8″ end mill holder
Additional information
| Weight | .1 lbs |
|---|---|
| Dimensions | 3.5 × .4 × .4 in |
| Shank Size | 3/8" Inch |
| Over All Length | 3 1/4" |
| Flutes | 2 |
| Bit Width | 3/8" |
| Bit Cutter Length | 1 3/4" |
| Bit Recommended Cut Depth (Per Pass/Step Down) | 1" |
| CNC Recommended Feed Rate | 1"/sec |
| CNC Recommended Plunge Rate | 1"/Sec |
| CNC Recommended RPMs | 10000 rpms |
| Bit Style | End Mill |
Related products
-
Face Burr Bit Narrow 3/8″ Inch Shank
$59.98Bits with 3/8″ shank require a shaft and 3/8″ end mill holder
-
Bullet Burr Bit 125 Paddle Style Threaded
$219.98 Read moreMuch lighter than most large burrs
(now with slot to reduce weight even more)
Will work with medium die grinder with medium shaft -
Diamond Sharpening Stone 7/32″ Inch with 1/8″ Shank
$13.98
