1/4″ Ball Nose End mill Bit with 1/2″ Inch Shank

Related products

• 

  12″ Cut Out End Mill Bit with 5/8″ Inch Shank

  12″ total length. 9″ of cut. 5/8″ Shank, 7/8” diameter
  Cut all of the way through a block!

  3 HP Spindle or Router	5 HP Spindle or Router
  RPM 4000 Feed Rate .66 inch/min Plunge .33 inch/min Step Down 1.5″	RPM 7000 Feed Rate .66 inch/min Plunge .85 inch/min Step Down 2.5″

   

  $329.98
  12" Cut Out End Mill Bit with 5/8" Inch Shank quantity

  Add to cart
• 

  1/2″ End Mill Bit 1/2″ Shank 6″ Inch OAL

  For use in an ice lathe
  Recommended RPM- 14,000
  Recommended feed rate for Spindle- 3″/Second (180″/minute)
  Recommended feed rate for Router- 2″/Second (120″/minute)

  $52.98
  1/2" End Mill Bit 1/2" Shank 6" Inch OAL quantity

  Add to cart
• 

  3/8″ End Mill Bit 3/8″ Inch Shank

  4 1/4″ oal, 3″ of cut
  Bits with 3/8″ shank require a shaft and 3/8″ end mill holder

  $28.98
  3/8" End Mill Bit 3/8" Inch Shank quantity

  Add to cart