Description
1/4″ wide at the tip that tapers out as you move up the endmill. Stronger than straight endmills, but you need to keep the taper in mind when design your carving
1/4″ Tapered Endmill With 1/2 Shank
$79.98
Out of stock
Additional information
| Weight | .2 lbs |
|---|---|
| Dimensions | 5.5 × .75 × .75 in |
| Shank Size | 1/2" Inch |
| Bit Width | 1/4" |
| Bit Cutter Length | 3 1/4" |
| Bit Recommended Cut Depth (Per Pass/Step Down) | 1" |
| Over All Length | 5 1/2" |
| Flutes | 3 |
| CNC Recommended Plunge Rate | 1"/Sec |
| CNC Recommended Feed Rate | 1"/sec |
| CNC Recommended RPMs | 10000 rpms |
| Bit Style | End Mill, Tapered |
Related products
-
Flame Burr Bit Green with 1/4″ Inch Shank
$33.98Use in a stock medium die grinder
-
Face Burr Bit Narrow 3/8″ Inch Shank
$59.98Bits with 3/8″ shank require a shaft and 3/8″ end mill holder
-
Bullet Burr Bit 90 Threaded
$136.98less Aggressive, Better Finisher
Will work with medium die grinder with medium shaft