$349.98
Available on backorder
12″ total length. 9″ of cut. 3/4″ Shank, 7/8” diameter
Cut all of the way through a block!
| 3 HP Spindle or Router | 5 HP Spindle or Router |
| RPM 4000 Feed Rate .66 inch/min Plunge .33 inch/min Step Down 1.5″ |
RPM 7000 Feed Rate .66 inch/min Plunge .85 inch/min Step Down 2.5″ |
| Weight | 1 lbs |
|---|---|
| Dimensions | 12.5 × 1.25 × 1.25 in |
You must be logged in to post a review.
3.25″ oal, 1.25″ of cut
Bits with 3/8″ shank require a shaft and 3/8″ end mill holder
3 Flutes, 8″oal, 5″ of cut
Recommended RPM- 14,000
Recommended feed rate for Spindle- 3″/Second (180″/minute)
Recommended RPM- 24,000
5″ overall length1/2″ shank 3.5″ length of cut 1/4″ tip
This bit fits in both the above 1/2″ end mill holder & a CNC collet.
Reviews
There are no reviews yet.