Additional information
| Weight | .2 lbs |
|---|---|
| Dimensions | 6 × .5 × .5 in |
EM 1/2 x 1/2 x 6 OAL
$69.98
1/2″ Shank x 1/2″ Width x 6″ Over All Length 3 Flute Endmill with 4″ of cut
Recommended RPM- 14,000
Recommended feed rate for Spindle- 3″/Second (180″/minute)
Recommended feed rate for Router- 2″/Second (120″/minute)
Related products
-
1/2″ End Mill 1/2″ Shank 7″ OAL
$98.983 Flutes, 7″oal, 5″ of cut
Recommended RPM- 14,000
Recommended feed rate for Spindle- 3″/Second (180″/minute)
Recommended feed rate for Router- 2″/Second (120″/minute) -
1/2″ End Mill 1/2″ Shank 8″ OAL
$99.983 Flutes, 8″oal, 5″ of cut
Recommended RPM- 14,000
Recommended feed rate for Spindle- 3″/Second (180″/minute) -
1/2″ End Mill Holder
$56.98Accepts all bits with 1/2″ shanks
Threads onto either die grinder with a shaft installed
