If used in CNC –
3″ thick Ice
Plunge 2.6″ deep
Z Speed .3″/second (18″/minute)
There are no reviews yet.
You must be logged in to post a review.
Accepts all bits with 1/2″ shanks
Threads onto either die grinder with a shaft installed
1/2″ Shank x 1/2″ Width x 6″ Over All Length 3 Flute Endmill with 4″ of cut
Recommended RPM- 14,000
Recommended feed rate for Spindle- 3″/Second (180″/minute)
Recommended feed rate for Router- 2″/Second (120″/minute)
Fits large Makita die Grinders
Take out 4 screws and swap with this pre-assembled neck