1/2″ End Mill 1/2″ Shank 6″ OAL Ball Nose
$79.98
For use in an ice lathe
Recommended RPM- 14,000
Recommended feed rate for Spindle- 3″/Second (180″/minute)
Recommended feed rate for Router- 2″/Second (120″/minute)
Related products
1/2″ Sleeve
$15.98Convert a 3/8″ shank bit to 1/2″ shank
Put superglue on the shank of the bit then slide sleeve over shank. Allow to fully set before use
One sleeve converts one bit
1/2″ End Mill 1/2″ Shank 6″ OAL Carbide
6″ total length. 4 1/2″ of teeth. 1/2″ Shank
Improve your CNC's production
Recommended RPM- 14,000
Recommended feed rate for Spindle- 3″/Second (180″/minute)
Recommended feed rate for Router- 2″/Second (120″/minute)$99.98
Large Sphere Table Jig
$349.98Drill press requirements-
11″ distance between chuck and mounting plate
1.5″ of chuck travel
1700 RPM works very well
Recommended if not using CNC to prep blanks
(prep ice blanks to 6″ x 20″)
