1/2″ End Mill 1/2″ Shank 6″ OAL
$52.98
For use in an ice lathe
Recommended RPM- 14,000
Recommended feed rate for Spindle- 3″/Second (180″/minute)
Recommended feed rate for Router- 2″/Second (120″/minute)
Related products
Square Sphere Table Jig
$229.98Drill press requirements-
11″ distance between chuck and mounting plate
1.5″ of chuck travel
1700-3000 RPM works very well
Recommended if using CNC to prep blanks(prep ice blanks to 6″ x 7.5″ x 2 5/8″)
Distance from chuck to where you mount the table is 11″
5.35″ between the table top & the chuck
Large Die Grinder Shaft
$109.98“Large Shaft” for the Large Makita 800 for ice carving
With high quality bearings
EM 1/2 x 1/2 x 6 OAL
$69.981/2″ Shank x 1/2″ Width x 6″ Over All Length 3 Flute Endmill with 4″ of cut
Recommended RPM- 14,000
Recommended feed rate for Spindle- 3″/Second (180″/minute)
Recommended feed rate for Router- 2″/Second (120″/minute)
