Additional information
| Weight | .2 lbs |
|---|---|
| Dimensions | 7 × .5 × .5 in |
1/2″ End Mill Bit 1/2″ Shank 7″ Inch OAL
$98.98
3 Flutes, 7″oal, 5″ of cut
Recommended RPM- 14,000
Recommended feed rate for Spindle- 3″/Second (180″/minute)
Recommended feed rate for Router- 2″/Second (120″/minute)
Related products
-
1/2″ End Mill Bit 1/2″ Shank 6″ Inch OAL
$69.981/2″ Shank x 1/2″ Width x 6″ Over All Length 3 Flute Endmill with 4″ of cut
Recommended RPM- 14,000
Recommended feed rate for Spindle- 3″/Second (180″/minute)
Recommended feed rate for Router- 2″/Second (120″/minute) -
1/2″ End Mill Bit 1/2″ Shank 6″ Inch OAL
$52.98For use in an ice lathe
Recommended RPM- 14,000
Recommended feed rate for Spindle- 3″/Second (180″/minute)
Recommended feed rate for Router- 2″/Second (120″/minute) -
1/4″ End Mill Bit XL 1/2″ Inch Shank
$54.98Recommended RPM- 24,000
5″ overall length1/2″ shank 3.5″ length of cut 1/4″ tip
This bit fits in both the above 1/2″ end mill holder & a CNC collet.
