Additional information
| Weight | .2 lbs |
|---|---|
| Dimensions | 8 x .5 x .5 in |
1/2″ End Mill 1/2″ Shank 8″ OAL
$99.98
3 Flutes, 8″oal, 5″ of cut
Recommended RPM- 14,000
Recommended feed rate for Spindle- 3″/Second (180″/minute)
Related products
Table for Sphere bits
$349.98Drill press requirements-
11″ distance between chuck and mounting plate
1.5″ of chuck travel
1700 RPM works very well
Recommended if not using CNC to prep blanks
(prep ice blanks to 6″ x 20″)
1/2″ End Mill Holder
$56.98Accepts all bits with 1/2″ shanks
Threads onto either die grinder with a shaft installed
1/4″ End Mill XL 1/2″ Shank
$54.98Recommended RPM- 24,000
5″ overall length1/2″ shank 3.5″ length of cut 1/4″ tip
This bit fits in both the above 1/2″ end mill holder & a CNC collet.
