CNC Collett

Related products

• 

  1/2″ End Mill 1/2″ Shank 6″ OAL Carbide

  6″ total length. 4 1/2″ of teeth. 1/2″ Shank
  Improve your CNC's production
  Recommended RPM- 14,000
  Recommended feed rate for Spindle- 3″/Second (180″/minute)
  Recommended feed rate for Router- 2″/Second (120″/minute)

  $99.98
  1/2" End Mill 1/2" Shank 6" OAL Carbide quantity

  Add to cart
• 

  1/2″ End Mill 1/2″ Shank 6″ OAL Ball Nose

  For use in an ice lathe
  Recommended RPM- 14,000
  Recommended feed rate for Spindle- 3″/Second (180″/minute)
  Recommended feed rate for Router- 2″/Second (120″/minute)

  $79.98
  1/2" End Mill 1/2" Shank 6" OAL Ball Nose quantity

  Add to cart
• 

  12″ Cut Out End Mill with 3/4″ Shank

  12″ total length. 9″ of cut. 3/4″ Shank, 7/8” diameter
  Cut all of the way through a block!

  3 HP Spindle or Router	5 HP Spindle or Router
  RPM 4000 Feed Rate .66 inch/min Plunge .33 inch/min Step Down 1.5″	RPM 7000 Feed Rate .66 inch/min Plunge .85 inch/min Step Down 2.5″

  $329.98
  12" Cut Out End Mill with 3/4" Shank quantity

  Add to cart