CNC Bits

Showing 1–12 of 20 results

1/2″ 8″ Ballnose End Mill Bit with 1/2″ Inch Shank
Great for 3D CNC carvings
10,000 RPMs Recommended
Recommended Step over setting is .1″ for 3D Areas
$139.98
1/2" 8" Ballnose End Mill Bit with 1/2" Inch Shank quantity
1/4″ Ball Nose End mill Bit with 1/2″ Inch Shank
Great for 3D Carvings
$89.98
Out of stock
1/2″ End mill Bit 2 Flute 1/2″ Shank 8″ Inch OAL Duggan Bit
Recommended Speeds
RPMs – 10000
Feed Rate – 1.5 inch/second
Plunge – 1 inch/second
$159.98
Out of stock
Budget Vee 3/8″ Inch Shank
Vee Angle 60 Degrees
Depth 1″
Width 1.25″
$39.98
Budget Vee 3/8" Inch Shank quantity
12″ Cut Out End Mill Bit with 3/4″ Inch Shank
$410.98
12" Cut Out End Mill Bit with 3/4" Inch Shank quantity
12″ Cut Out End Mill Bit with 5/8″ Inch Shank
$410.98
12" Cut Out End Mill Bit with 5/8" Inch Shank quantity
Ice Sphere bit 1/2″ Inch Shank
Create Perfect Ice Sphere using a Drill Press or CNC.
1/2″ Shank
$389.98
Sphere Size Clear
Ice Sphere bit 1/2" Inch Shank quantity
1/2″ End Mill Bit 1/2″ Shank 6″ Inch OAL 2 flute

$72.98
1/2" End Mill Bit 1/2" Shank 6" Inch OAL 2 flute quantity
1/2″ End Mill Bit 1/2″ Shank 6″ Inch OAL
1/2″ Shank x 1/2″ Width x 6″ Over All Length 3 Flute Endmill with 4″ of cut
$99.98
1/2" End Mill Bit 1/2" Shank 6" Inch OAL quantity
1/2″ End Mill Bit 1/2″ Shank 6″ Inch OAL Ball Nose
$89.98
Out of stock
1/2″ End Mill Bit 1/2″ Shank 8″ Inch OAL
3 Flutes, 8″oal, 5″ of cut
Recommended RPM- 14,000
Recommended feed rate for Spindle- 3″/Second (180″/minute)
$129.98
1/2" End Mill Bit 1/2" Shank 8" Inch OAL quantity
1/2″ End Mill Bit 1/2″ Shank 7″ Inch OAL
3 Flutes, 7″oal, 5″ of cut
Recommended RPM- 14,000
Recommended feed rate for Spindle- 3″/Second (180″/minute)
Recommended feed rate for Router- 2″/Second (120″/minute)
$126.98
1/2" End Mill Bit 1/2" Shank 7" Inch OAL quantity

Showing 1–12 of 20 results