CNC
Showing 13–24 of 31 results
-
CNC ER25 Collett
$41.98Fits 25mm Spindles
-
Budget Vee 3/8″ Inch Shank
$39.98Vee Angle 60 Degrees
Depth 1″
Width 1.25″ -
12″ Cut Out End Mill Bit with 3/4″ Inch Shank
$410.98 -
12″ Cut Out End Mill Bit with 5/8″ Inch Shank
$410.98 -
Ice Sphere bit 1/2″ Inch Shank
$389.98Create Perfect Ice Sphere using a Drill Press or CNC.
1/2″ Shank
-
1/2″ End Mill Bit 1/2″ Shank 6″ Inch OAL 2 flute
$72.98 -
1/2″ End Mill Bit 1/2″ Shank 6″ Inch OAL
$99.981/2″ Shank x 1/2″ Width x 6″ Over All Length 3 Flute Endmill with 4″ of cut
-
1/2″ End Mill Bit 1/2″ Shank 6″ Inch OAL Ball Nose
$89.98Out of stock
-
1/2″ End Mill Bit 1/2″ Shank 8″ Inch OAL
$129.983 Flutes, 8″oal, 5″ of cut
Recommended RPM- 14,000
Recommended feed rate for Spindle- 3″/Second (180″/minute) -
1/2″ End Mill Bit 1/2″ Shank 7″ Inch OAL
$126.983 Flutes, 7″oal, 5″ of cut
Recommended RPM- 14,000
Recommended feed rate for Spindle- 3″/Second (180″/minute)
Recommended feed rate for Router- 2″/Second (120″/minute) -
1/4″ End Mill Bit XL 1/2″ Inch Shank
$84.98Recommended RPM- 24,000
5″ overall length1/2″ shank 3.5″ length of cut 1/4″ tip
This bit fits in both the above 1/2″ end mill holder & a CNC collet. -
3/8″ End Mill Bit 3/8″ Inch Shank
$48.984 1/4″ oal, 3″ of cut
Bits with 3/8″ shank require a shaft and 3/8″ end mill holder
Showing 13–24 of 31 results