Start with a clear block makerOpen the lidPlace a Plastic liners in the wellPlace a Heavy Duty Clip at each endFill the well to about 2″ from the topThis shows a full wellPlace a Pump in opposing cornersClose the lid overnight The next day remove 1 pumpOnce the block is the desired thickness open up the lidRemove the 1 remaining PumpUsing a sump pump, suck out the water. Some use vacuums, we like to have up to 3 pumps working simultaneously. We also have a network of PVC, so a drain isn’t more than 6′ awayClip in your lifter bar with Heavy duty lifter bar platesWe carry the block to the band saw with an overhead craneRemove the lifter barRemove the Clip with a 6 prong pick or an Ice pickTrim the blocks to the desired thickness
