-
21″ x 41″ Drip pans
$11.98/ each
Case of 25$299.50Sold with Pre-cut tubing & hardware,
Holes are pre-drilled
We offer personalized drip pans, let us know if you are interested. -
21″ x 41″ Drip pans 100 or more
$9.98/each
Case of 25
Minimum of 4 cases
Save $200$249.50Sold with Pre-cut tubing & hardware,
Holes are pre-drilled
We offer personalized drip pans, let us know if you are interested. -
Skirt for 21″ x 41″ Drip Pans
$174.50$6.98/each
Cases of 25 -
Foam Risers
Now Thicker – (1 1/2″ Thick)
$2.98/ea (Cases of 10)
$1.79/ea (Pallet of 240)$29.80 – $429.60 Select optionsFoam risers allow you to elevate an inexpensive plastic drip pan & illuminate it from below. By elevating the drip pan you can place a wide variety of lights under your ice carving. Try putting the foam under the tablecloth & the light on top of the cloth.
Use 1 riser with 18″ x 24″ pans
Use 2 risers with 21″ x 27″ pans
Use 2 risers with 11″ x 41″ pans
Use 3 risers with 21″ x 41″ pansPlease Note: UPS charges this item based on “Dimensional Weight” of a 10″x15″x16″ box, not based on the actual Weight.
-
Foam Risers 10+ Cases
$2.28/ea
10 per Case
Minimum 10 Cases
Now Thicker – (1 1/2″ Thick)$22.80Foam risers allow you to elevate an inexpensive plastic drip pan & illuminate it from below. By elevating the drip pan you can place a wide variety of lights under your ice carving. Try putting the foam under the tablecloth & the light on top of the cloth.
Use 1 riser with 18″ x 24″ pans
Use 2 risers with 21″ x 27″ pans
Use 2 risers with 11″ x 41″ pans
Use 3 risers with 21″ x 41″ pansPlease Note: UPS charges this item based on “Dimensional Weight” of a 10″x15″x16″ box, not based on the actual Weight.
-
Hardware Kits
$26.98Enough hardware for 25 pans
Includes- 2 nuts, 1 rubber washer, 1 flat washer & 1 Steel nipple for each drip pan
