CNC 3D Toolpath Files

  • Ganesha 3d Relief CNC Machine Code

    All the tool paths to run a Ganesha carving that you can snowfill on your CNC with a 9 inch block.  Current supported formats are Shopbot, Bulldog, Laguna, and Standard G-Code. Version with out the 7/8″ cutout bit and 6″ thick block versions available upon request

    Size on CNC – X=0 to 40 Y=0 to 20 Z=0 to -9 (or 0 to -6 upon request) Origin Point – Bottom Left Corner on surface of the ice (This may vary from your normal orgin point.  All X and Y coordinates are positive in this program) Toolpaths included – 7/8″ Cutout Bit, 1/2″ 8″ OAL, 1/4XL” Ball Nose (all separate Files) Notes – CNC Endmill holder need for 1/4″ to reach 5.5″ deep to ensure your spindle will not hit the ice (Smaller spindles may not have this issue) This is a license for use, not for sharing or resale. Those found in violation will be blocked from further cnc file purchases  
    $98.98
  • Han in carbonite 3d Relief CNC Machine Code

    All the tool paths to run a Han Solo on your CNC with a 6 inch block.  Current supported formats are Shopbot, Bulldog, Laguna, and Standard G-Code.

    Size on CNC – X=0 to 40 Y=0 to 20 Z=0 to -9.5
    Origin Point – Bottom Left Corner on surface of the ice (This may vary from your normal orgin point.  All X and Y coordinates are positive in this program)
    Toolpaths included – 1/2″ 8″ OAL Ball , 1/8″ (all separate Files)
    This is a license for use, not for sharing or resale. Those found in violation will be blocked from further cnc file purchases

     

    $98.98
  • R2-D2 3d Relief CNC Machine Code

    All the tool paths to run a 3D R2-D2 on your CNC with a 9.5 inch block.  Current supported formats are Shopbot, Bulldog, Laguna, and Standard G-Code.  Includes optional toolpaths for snowfills of the blue areas on R2D2

    Size on CNC – X=0 to 40 Y=0 to 20 Z=0 to -9.5
    Origin Point – Bottom Left Corner on surface of the ice (This may vary from your normal orgin point.  All X and Y coordinates are positive in this program)
    Toolpaths included – 7/8″ Cutout Bit, 1/2″ 8″ OAL Ball (all separate Files)
    Notes – CNC Endmill holder need for 1/2″ to reach 9″ deep to ensure your spindle will not hit the ice between R2’s legs
    This is a license for use, not for sharing or resale. Those found in violation will be blocked from further cnc file purchases

     

    $98.98
  • Santa 3d Relief CNC Machine Code

    All the tool paths to run a Santa Head carving that you can snowfill on your CNC with a 9 inch block.  Current supported formats are Shopbot, Bulldog, Laguna, and Standard G-Code. Version with out the 7/8″ cutout bit and 6″ thick block versions available upon request

    Size on CNC – X=0 to 40 Y=0 to 20 Z=0 to -9 (or 0 to -6 upon request)
    Origin Point – Bottom Left Corner on surface of the ice (This may vary from your normal orgin point.  All X and Y coordinates are positive in this program)
    Toolpaths included – 7/8″ Cutout Bit, 1/2″ 8″ OAL, 1/4XL” Ball Nose (all separate Files)
    Notes – CNC Endmill holder need for 1/4″ to reach 5.5″ deep to ensure your spindle will not hit the ice (Smaller spindles may not have this issue)
    This is a license for use, not for sharing or resale. Those found in violation will be blocked from further cnc file purchases

     

    $98.98