3/8″ Versatile Kit Bit Videos
Cutting Kit 3/8″ Bit Videos
-
Swirl Bit with 3/8″ Inch Shank
$189.98 Read more -
Budget Vee 3/8″ Inch Shank
Vee Angle 60 Degrees
Depth 1″
Width 1.25″ -
Silver Cyclone 3/8″ Inch Shank
$174.98 Read more -
Bubble Bit 2″ 3/8″ Inch shank
Bits with 3/8″ shank require a shaft and 3/8″ end mill holder
-
Bubble Bit 2.5″ 3/8″ Inch shank
Bits with 3/8″ shank require a shaft and 3/8″ end mill holder
-
Pebble Bit 2″ 3/8″ Inch shank
$299.98 -
Bubble Bit Dime 3/8″ Inch shank
Bits with 3/8″ shank require a shaft and 3/8″ end mill holder
-
Bubble bit Quarter 3/8″ Inch shank
Bits with 3/8″ shank require a shaft and 3/8″ end mill holder
-
Bubble Silver Dollar 3/8″ Inch shank
Bits with 3/8″ shank require a shaft and 3/8″ end mill holder
-
Bubble Bit Kit 3/8″ Inch Shank
Bubble Bit Kit includes all 3 of the above Bubble Bits 3/8″ Shank
-
Costic Vee Bit with 3/8″ Inch Shank
The most versatile detail bit Period! Use the pointy tip for small details & plunge it in for deep heavy details. Titanium!
Bits with 3/8″ shank require a shaft and 3/8″ end mill holder -
Cylinder Bit 3/8″ Inch 125 Grit
5″ overall length
Bits with 3/8″ shank require a shaft and 3/8″ end mill holder -
1/2″ End Mill Bit 3/8″ Inch Shank
6″ overall length
Bits with 3/8″ shank require a shaft and 3/8″ end mill holder -
3/8″ End Mill Bit 3/8″ Inch Shank
4 1/4″ oal, 3″ of cut
Bits with 3/8″ shank require a shaft and 3/8″ end mill holder -
1/4″ End Mill Bit 3/8″ Inch Shank
3.25″ oal, 1.75” of cut
Bits with 3/8″ shank require a shaft and 3/8″ end mill holder -
1/8″ End Mill Bit 3/8″ Inch Shank
2 3/4″ oal, 1″ of cut
Bits with 3/8″ shank require a shaft and 3/8″ end mill holder -
1/8″ End Mill Bit XL 3/8″ Inch Shank
3.25″ oal, 1.25″ of cut
Bits with 3/8″ shank require a shaft and 3/8″ end mill holder -
1/4″ XL End Mill Bit 3/8″ Inch Shank
5.1/2″oal, 3.5″ of cut
Bits with 3/8″ shank require a shaft and 3/8″ end mill holder -
Medium Die Grinder Shaft Adapter
Small Shaft Adapter for 600 Makita to use threaded bits
-
Large Die Grinder Shaft Adapter
Large shaft Adapter for ice carving, fits large Makita 800
-
Medium Die Grinder Shaft
“Medium Shaft” for the Medium Makita 600’s
-
Large Die Grinder Shaft
“Large Shaft” for the Large Makita 800 for ice carving
With high quality bearings -
3/8″ Inch End Mill Bit Holder
Accepts all bits with 3/8″ shanks
Threads onto either die grinder with a shaft installed -
1/4″ to 3/8″ Inch Sleeve
$29.98 -
3/8″ to 1/2″ Inch Sleeve
$29.98 -
Face Burr Bit Pointy with 3/8″ Inch Shank
Bits with 3/8″ shank require a shaft and 3/8″ end mill holder
-
Face Burr Bit Wide with 3/8″ Inch Shank
Bits with 3/8″ shank require a shaft and 3/8″ end mill holder
-
Face Burr Bit Narrow 3/8″ Inch Shank
Bits with 3/8″ shank require a shaft and 3/8″ end mill holder
-
3/16″ End Mill Bit 3/8″ Inch Shank
3 3/4″ oal, 2″ of cut, 3 flute
Bits with 3/8″ shank require a shaft and 3/8″ end mill holder -
1/8″ End Mill Bit Super Long 3/8″ Inch Shank
3.75″ oal, 2″ of cut
Bits with 3/8″ shank require a shaft and 3/8″ end mill holder -
1/16″ End Mill Bit 3/8″ Inch Shank
3.25″ oal, 1.5″ of cut
Bits with 3/8″ shank require a shaft and 3/8″ end mill holder