-
1/2″ 8″ Ballnose End Mill Bit with 1/2″ Inch Shank
$139.98Great for 3D CNC carvings
10,000 RPMs Recommended
Recommended Step over setting is .1″ for 3D Areas -
1/4″ Ball Nose End mill Bit with 1/2″ Inch Shank
$89.98 Read moreGreat for 3D Carvings
-
Zero Kit for CNC
$649.98 Read moreThis kit includes everything you need to minimize or even eliminate Zeroing your CNC. All bits can be adjust to the same length as our 1/2″x 6 long” bit. Great for situation where you can not reach your zeroing location
-
1/2″ End mill Bit 2 Flute 1/2″ Shank 8″ Inch OAL Duggan Bit
$159.98Recommended Speeds
RPMs – 10000
Feed Rate – 1.5 inch/second
Plunge – 1 inch/second -
1/2″ End Mill Bit 1/2″ Shank 6″ Inch OAL 2 flute
$72.98For use in an ice lathe
Recommended RPM- 14,000
Recommended feed rate for Spindle- 3″/Second (180″/minute)
Recommended feed rate for Router- 2″/Second (120″/minute) -
1/2″ End Mill Bit 1/2″ Shank 6″ Inch OAL
$99.981/2″ Shank x 1/2″ Width x 6″ Over All Length 3 Flute Endmill with 4″ of cut
Recommended RPM- 14,000
Recommended feed rate for Spindle- 3″/Second (180″/minute)
Recommended feed rate for Router- 2″/Second (120″/minute) -
1/2″ End Mill Bit 1/2″ Shank 6″ Inch OAL Ball Nose
$89.98 Read moreFor use in an ice lathe
Recommended RPM- 14,000
Recommended feed rate for Spindle- 3″/Second (180″/minute)
Recommended feed rate for Router- 2″/Second (120″/minute) -
1/2″ End Mill Bit 1/2″ Shank 8″ Inch OAL
$129.98 Read more3 Flutes, 8″oal, 5″ of cut
Recommended RPM- 14,000
Recommended feed rate for Spindle- 3″/Second (180″/minute) -
1/2″ End Mill Bit 1/2″ Shank 7″ Inch OAL
$126.983 Flutes, 7″oal, 5″ of cut
Recommended RPM- 14,000
Recommended feed rate for Spindle- 3″/Second (180″/minute)
Recommended feed rate for Router- 2″/Second (120″/minute) -
1/4″ End Mill Bit XL 1/2″ Inch Shank
$84.98Recommended RPM- 24,000
5″ overall length1/2″ shank 3.5″ length of cut 1/4″ tip
This bit fits in both the above 1/2″ end mill holder & a CNC collet.
