Gather- 1 Threaded nipple, 1 washer, 1 rubber washer, & 2 nuts (& a tube) Thread 1 nut onto threaded nipple (about 1/3 of the way) Slide a washer over the threaded nipple Push the short end of the threaded nipple through the drip pan Slide rubber washer over the threaded nipple Tighten a second nut on the inside of the pan Slide the tube over the threaded nipple
![](https://i0.wp.com/www.icesculptingtools.com/wp-content/uploads/2017/03/wsi-imageoptim-Assemble-an-ice-sculpture-pan-6.jpg?fit=366%2C241&ssl=1)