Finishing a logo

Take the logo pieces from the freezer

Assemble them using Aluminum fusion method

This footer is 20″ x 6″ x 4″

Freeze footer on the bottom (upside down)

Our footers are usually-20″ x 10″ x 4″

Freeze a 20″ x 8″ x 4″ piece of ice on top
(Using an Angle grinder with a 8 Grit sanding Disc remove the larger boogers of slush
Next (using a Pistol grip sander & Sand paper) Sand the logo smooth on both sides
Apply the detail (with a Die grinder & Vee bit)

Assemble & hose off the logo (set on gentle shower)

We will deliver this ice sculpture in 2 pieces

Did you notice that this entire sculpture is designed to drip into an 18″ x 24″ drip pan?