Description
1/4″ wide at the tip that tapers out as you move up the endmill. Stronger than straight endmills, but you need to keep the taper in mind when design your carving
$79.98
Out of stock
1/4″ wide at the tip that tapers out as you move up the endmill. Stronger than straight endmills, but you need to keep the taper in mind when design your carving
Weight | .2 lbs |
---|---|
Dimensions | 5.5 × .75 × .75 in |
Shank Size | 1/2" Inch |
Bit Width | 1/4" Tapered |
Bit Cutter Length | 3 1/4" |
Bit Recommended Cut Depth (Per Pass/Step Down) | 1" |
Over All Length | 5 1/2" |
Flutes | 3 |
CNC Recommended Plunge Rate | 1"/Sec |
CNC Recommended Feed Rate | 1"/sec |
CNC Recommended RPMs | 10000 rpms |